Table of Contents
Gas Fireplace: Nothing compares to the warmth of a fireplace when it comes to increasing the heat when the weather becomes colder. But it may be time to think about a change if you’re sick of the filth and inefficiency of a wood fireplace. The total cost is far less than building a brand-new system since gas fireplace inserts are already in existing wood-burning fireplaces. The insert will cost roughly $1,200, and labor will cost between $500 and $3,500, depending on how complex the task is.
The cost-effective, simple gas fireplace insert installation will boost your home’s overall heating effectiveness without sacrificing warmth.
Cost of a Gas Fireplace Insert on average
- Typical Price $2,000
- Most expensive $6,000+
- Lowest Price $1000
What Is the Price of a Gas Fireplace Insert?
Before installing your new gas insert, you must budget a few additional costs. It would be best to ensure that everything you do complies with the regional construction rules since you will be dealing with gas lines. Additionally, you must clean and fix any issues with your wood-burning fireplace system.
Even if you haven’t been burning wood recently, you should still do this since your chimney and flue may have been impacted by animals, plants, old soot, and weather damage. Expect your ultimate bill to increase from $200 to $1,000 due to these unexpected expenses.
Vented vs. Unvented
The gas logs utilized in your insert are gas fireplace insert vents. To properly vent the carbon monoxide from vented gas logs, your fireplace must have a flue and chimney. Due to heat loss via the chimney, they are less effective than unvented gas logs. Unvented gas logs are often less costly, while vented gas logs’ flames and log sets mimic a wood-burning fireplace more closely.
Despite having a less realistic appearance, unvented gas logs are more effective and less costly. Since a chimney system is unnecessary, any gases are discharged into your house. Fireplaces like this also include sensors that will turn themselves off immediately if there is any risk. Be aware that unvented gas units are prohibited in certain states.
When an existing chimney system can be utilized for ventilation, vented units will likely make the most sense.
Gas Fireplace vs. Gas Fireplace Insert
Gas fireplaces and gas fireplace inserts seem interchangeable since they both use gas, are very efficient, need no upkeep, and heat your house. Making the optimal decision for your heating requirements requires knowing a few significant system distinctions.
In essence, a gas insert is a large metal firebox that is installed within a wood-burning fireplace that already exists. A gas fireplace insert is an excellent option for homes with an open hearth, chimney, and flue since they can only be fitted in an existing fireplace.
You may install a gas insert instead of your wood-burning fireplace if it is no longer functional, whether you are worried about efficiency or the environment. Other alternatives exist, such as pellet stoves, electric inserts, etc.
A pre-existing fireplace system is not necessary for a gas fireplace. These units come in vented and unvented varieties and are built similarly to gas inserts. A gas fireplace can be a better option if you are constructing a new house or already possess a home without a hearth and chimney system.
Cost of Gas Fireplace Insert Repair
Installing a gas fireplace insert has several advantages, including that almost all components can be fixed or replaced. This indicates that your fireplace insert may survive considerably, mainly if you give it good care and frequent maintenance.
If you have any questions or lack knowledge of gas and gas line installation, we advise you to hire a service professional. This is because any repairs are likely to affect your home’s gas lines (either directly or indirectly).
The average cost of repairs for gas fireplace inserts is between $100 and $200. The size, age, and condition of your fireplace, your neighborhood, any required replacement components, the season and severe weather, and how fast you need the repairs completed will all affect the ultimate expenses. Remember that you may always compare quotes from several contractors for your repair job.
Cost to Install Different Styles of Gas Fireplaces
A terrific method to make your house seem cozy and inviting is with a gas fireplace. They are simple to operate and don’t pose the same safety risks as fireplaces that burn wood. However, there are various kinds of gas fireplaces to choose from, each with a unique set of installation expenses. The comparison of the different gas fireplace installation types is as follows:
- The typical Price of a tabletop gas fireplace is from $250 to $500. Tabletop gas fireplaces are ideal for compact settings since they don’t take up much room. They are also quite reasonably priced, making them an excellent choice if money is tight.
- Gas log fireplace: Prices typically range from $1,700 to $7,000. This is a fantastic substitute for fireplaces that burn wood because you can switch them on and off whenever you want.
- A freestanding gas fireplace typically ranges from $1,600 to $7,000. Freestanding gas fireplaces have the functionality and efficiency of gas fuel but are made to stand alone and look like a conventional wood-burning stove or fireplace.
- The typical price range for a wall-mounted gas fireplace is between $1,200 and $4,000. Unlike a regular fireplace built into the wall, a wall-mounted fireplace is intended to be put directly on the wall.
- The typical Price for a corner gas fireplace ranges from $1,900 to $5,400. As its name suggests, corner fireplaces are designed to fit into a corner of a room. This is a space-saving choice that enables you to make use of the corner space and provide a warm and welcoming ambiance.
- The Price of an island gas fireplace might reach $6,000. A particular kind of gas fireplace called an island fireplace is intended to be put in the middle of a room or as a room divider. Up to $6,000 may be spent on it.
Cost Influences for Gas Fireplace Inserts
Without installing a fireplace themselves, homeowners may affordably enjoy the advantages of a wood-burning fireplace by using gas fireplace inserts. The size of the unit, whether vented or unvented, the labor and installation time, and the kind of fireplace all affect how much it will cost to install a gas fireplace.
For several reasons, the size of the unit directly influences the Price of a gas fireplace insert. Larger divisions can often use less fuel and provide more excellent heat. They also last longer than smaller ones and need less frequent maintenance. Additionally, consumers often install bigger units in spaces that need additional heating.
Vented vs. Unvented
There are two varieties of gas fireplace inserts: vented (which needs a chimney) and unvented (which doesn’t). The vent costs more overall but offers more realistic flames and sound. Unvented gas logs are more effective and less co, despite seeming less real.
Installation and labor
Although the labor and installation expenses will be far lower than they would be to install a brand-new gas fireplace, these prices might vary significantly based on the particular project. Depending on the kind of ducting required and whether the insert will run on natural gas or propane, they may add up rapidly.
The installation price will depend on the design of your gas fireplace insert. The cost will increase with the more intricate the design is or how much remarkable work is required. Every manufacturer sells their goods at various pricing ranges, and every model has a unique installation procedure and set of materials.
Cost of Gas Fireplace Maintenance
A gas fireplace is an excellent feature of any house. However, they need annual maintenance to guarantee their best performance and safety and save you money on potentially costly repairs.
Due to variables including the kind of fireplace, its age and condition, and the amount of care necessary, the cost of maintaining a gas fireplace might vary. However, routine gas fireplace maintenance, such as chimney inspections and cleanings, typically costs between $150 and $200.
Installing a gas fireplace insert has advantages.
Gas Fuel Supply
Gas is generally a more dependable energy source than wood or electricity. A gas fire eliminates the need to locate or buy firewood entirely and ensures that you have heat even if your power is down.
EPA-compliant and effective
Because of their high efficiency, gas fireplace inserts may heat your home effectively with less heat loss. Even the cheapest inserts have efficiency ratings of approximately 65%, which is still much higher than an open hearth or wood-burning fireplace. The finest inserts have efficiency rates of up to 99%. The EPA clean burn criteria will always be met or exceeded by modern gas fireplaces.
Simple to Use
A switch may be easily flipped to turn on and off a gas fireplace. If you don’t remember to add new logs, your fire won’t go out since a gas fireplace will keep burning until it is switched off. Models with timers or automated shutoffs are available. Additionally, you have control over specifics like flame height and temperature.
All genuine, unvented versions additionally have oxygen sensors that will switch the fireplace off immediately if a carbon monoxide threat arises.
Retrofit Your Wood-Burning Fireplace
Theoretically, there is no need for any substantial remodeling since gas fireplace inserts are designed to fit into an existing, wood-burning fireplace area, which saves both time and money. It also means that you don’t have to get rid of your lovely old fireplace, which is excellent if you think it to be aesthetically pleasing or historically relevant for your house.
Recognize that having a perfect fit may not be possible since older houses might not have fireplaces that are conventional sizes.
Gas fireplace inserts come in various styles so that you can select from sleek and contemporary to more rustic, cabin-style designs. You may choose the ideal model for your house or space.
One advantage of a gas fireplace is the availability of unvented models, which do not need an existing chimney or flue. A homeowner may save a lot of money and time by doing this. Since no heat is lost via a chimney, unvented versions use less energy.
However, as they shouldn’t be installed into an existing hearth, these fireplaces are often called “gas fireplaces” rather than “gas fireplace inserts.” The words are often used interchangeably since both versions use the same technology and have many of the same characteristics.
Minimal Upkeep Necessary
You don’t need to conduct much, if any, maintenance on your gas fireplace apart from an annual inspection, which might cost you between $50 and $150. Keep it tidy and avoid hitting it with a sledgehammer; it should keep operating for a while.
DIY Gas Fireplace Insert Installation vs. Hiring a Professional
We strongly advise hiring a professional to assist with installing your gas fireplace, even though gas fireplace inserts may look deceptively simple to install (mainly if they are pre-built). You must connect the fireplace to your gas line, ensure the firebox is installed securely and correctly, and make any required structural changes to your hearth. You may also need to feel at ease working with electricity and on a roof.
Regarding regulating fire and gas, construction rules are often extremely severe. A professional may assist in making understanding construction rules simple since they know the requirements you must follow. If gas lines are adjusted improperly, you, your family, and your home’s safety might be jeopardized.
Depending on the installation’s size and complexity, hiring a professional will cost between $500 and $3,500.
Even if you can install a gas fireplace insert yourself if you are well-equipped, the materials will still set you back $500 or more. It may be a challenging and risky undertaking. Therefore, we highly advise hiring an expert.
Advice on Lowering the Cost of a Gas Fireplace Insert
A gas fireplace insert may be the most efficient option for heating your house and lowering energy expenses. But you should know a few things before you go out and get that brand-new, gleaming insert.
Get many quotes for your job before choosing a contractor for your gas fireplace. You will be better equipped to determine what is ideal for your budget and house if you understand the expenses and available alternatives.
Get yourself ready
You may save costs on your project by doing easy preparations like cleaning before or adding finishing touches after the installation.
Given its significant cost, a gas fireplace insert needs the most incredible installation work. Don’t risk harming it or your property by installing it yourself if you want to get the most out of your new insert and safeguard your investment.
Do Fireplace Inserts Raise the Value of a Home?
The value of your house may be significantly increased by installing fireplace inserts. They first add aesthetic appeal to the living area. Potential buyers may be drawn to a fireplace insert that has been skillfully designed and installed because it creates a cozy and welcoming atmosphere. Not to mention, they may help your home’s energy efficiency. Redfin claims that fireplace inserts may raise your home’s value by up to 13%.
Do Gas Fireplace Inserts Make Sense Financially?
Gas fireplaces are a terrific investment for homeowners looking to add comfort and ambiance to their homes. These inserts are quick and easy to use, providing immediate warmth and air without dealing with wood smoke after each usage. A gas fireplace insert can be for you if convenience and simplicity are essential.
In addition, gas fireplace inserts are a fantastic choice for families wishing to reduce their heating expenses. They are more cost-effective than conventional wood-burning fireplaces since they provide heat efficiently at a reasonable price. Therefore, your demands and tastes will determine the worth of a gas fireplace insert.
Numerous national and local suppliers and cost databases were examined to determine the average costs in this article. All averaged numbers were accurate as of publishing but are subject to change.
Can a fireplace be added to an existing home?
A fireplace may indeed be added to an existing house. Adding a comfortable fireplace to your home is achievable if you are ready to pay the money and your local construction rules permit installing a suitable fireplace system. Make sure to do your research before deciding which type of fireplace will suit your home the best. Before beginning a major project like installing a fireplace, factors like project cost, system style, heating efficiency, and installation time should all be considered.
How can I get a gas fireplace insert for less money?
A gas fireplace insert nearly always results in lower heating expenses due to its improved energy efficiency, especially when replacing a wood-burning fireplace or increasing the heating area covered. You’ll also save money by using an existing fireplace system (instead of constructing a new one) and paying little attention to upkeep. Although initially costly, gas fireplace inserts are unquestionably a wise financial decision.
When should my fireplace insert be replaced?
It could be time to replace your fireplace insert if it isn’t operating correctly, doesn’t fit your new house’s design, or is too old to use.
Can a gas fireplace be installed without a chimney?
You will need a chimney to install a typical gas fireplace; that is true. It is advised to install a ventless or gas log insert if you don’t have a chimney.
If the electricity goes out, will my gas fireplace still work?
If the electricity goes out, you can still use my gas fireplace. It’s as easy as flicking a switch or lighting a match.